Universal Terminal Driveability Kit
Canadian Price: $295
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
AES LineSpi (SMART BOB)
Perfect tool for scan tool "No Communication" errors and CAN network diagnostics.
Canadian Price: $235
You are all too familiar with the DLC: it is small and next to impossible to probe without straining your back or damaging the pins.
Now, imagine a DLC that is 5-times larger, sits in your lap and loves to be probed.
We call it the AES LineSpi SMART BOB.
The AES LineSpi SMART BOB is a pass-through breakout box for the OBDII DLC (diagnostic link connector).
It's a DLC magnifier: makes the DLC 5-times larger.
It's a DLC extender: puts the DLC where you need it.
It's a spy: exposes the activity on each OBD-II dedicated dataline.
Yes, you still have to locate the vehicle's DLC and attach the LineSPI SMART BOB but after that everything is so much easier:
- Probing: no more damaged pins
- Power and Grounds: the LineSPI SMART BOB immediately indicates their status with LEDs on pins 4, 5, and 16.
- Monitoring: Use your lab scope, meter, logic probe, test light, etc to get voltage measurements from any DLC line.
- Jumpering: jumper from any pin to any other pin while scanning or monitoring.
- Your back: spend less time on your belly, bent over and squeezed in. When was the last time you did an oil change on your back*
- Scanning: perform all scan tool functions while doing everything listed above while sitting in the front seat or standing outside the car.
The AES LineSpi SMART BOB is 7.5" x 4" x 1.5", that is 5-times larger than the vehicle's DLC.
It is a 'smart' DLC 16-pin breakout box with pass-through technology: view live scan tool data while monitoring any DLC line with your lab scope, multimeter or logic probe. The intelligent front panel design of the AES LineSpi is enhanced with LEDs that identify OBD-II protocols making it easy to locate and reference datalines and identify the active protocol.
Compatibility and Connections
- Vehicles: The AES LineSpi SMART BOB is compatible with OBD-II vehicles.
- Scan Tools: use it with your OBD-II compatible tools: scan tools, codereaders, monitor readers or dataloggers.
- Measurement Tools: The AES LineSpi SMART BOB takes the 16-pin spades on the vehicle DLC and converts them to safety banana sockets. This allows you to connect all types of leads and probes that use 4mm banana plugs (including those with safety sheaths) into any of the 16-datalines. Any tool that uses a standard test lead or probe can then be connected to the the AES LineSpi SMART BOB, these include, lab scopes, meters, logic probes, test lights, etc...
- Measurement Types: in addition to scan data you can ohm out and check voltages at any pin with your scope, multimeter or logic probe.
More Featuress
- The AES LineSpi SMART BOB also gives quick, safe and convenient access to chassis ground and power through the DLC connector.
- 4-ft" extension cable with DLC adapter connects to vehicle.
- Pin 16 input protected with 1.2 amp polyfuse.
How does the AES LineSpi SMART BOB earn its money?
If the tool saves you as little as 5-minutes everyday and you earn more than $20/hour then the tool will pay for itself in 6 months.
The tool repays you by saving time when you run the special tests and measurements required to complete a repair or make a diagnosis. Additionally, before you scan the vehicle it is a good practice to test the DLC to ensure it will not fry your favorite scan tool. Your scan tool will love you for it!
You can use the AES LineSpi SMART BOB for:
- No communication between scan tool and vehicle: find out why the scan tool will not communicate, in many cases the DLC is the problem.
- Scan tool protection: Ever hear about aftermarket radios on VW's?
- Ohm-out and Jumper: perform special functions and tests.
- Bench Programming: yes, somebody does that
- Monitor voltage during Programming
- Transmitter Programming on some GMs
- Honda: set the ECM in SCS mode with your scan tool connected
- Lexus: help diagnose electronics systems (Sirius, GPS) on pin 6 and 14
- Troubleshoot Bosch controllers that short to ground
AES LineSPI (SMART BOB) Canadian Price: $225
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
GTC CT6100 Fuse Socket Connectors
The CT6100 is a new and innovative fuse socket connector set.
Canadian Price: $14.95
Consisting of three connectors sizes: Mini, ATO and Maxi to cover the most common fuse socket adapters requirements in the automotive and vehicular electrical repair field.
These specially designed, plastic encapsulated connectors provide quick and reliable access to the fuse block circuits for testing voltages, currents and for tapping into the power line without damaging the fuse block or wiring in the vehicle.
Built with durable chrome-plated contact leads for wear and corrosion resistance and a specially designed ABS plastic insulating body for easy insertion and extraction
CT6100 Features
- Ergonomically molded connector for easy insertion and extraction.
- Easy access connector tabs fit :
- ¼" quick connects.
- Alligator clips.
- Jumper Leads.
- Multimeter test leads.
- Plated contacts for maximum conductivity and durability.
- Fits all Maxi, ATO and Mini automotive fuse sockets.
- Tap power for:
- Cooling fans.
- Electric fuel pump.
- Power window motors.
- Electric doors.
- Lamps.
- Relays.
- Wiring harnesses.
GTC CT6100 Fuse Socket Connectors $14.95
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
EsiTest #142 PRO Test Lead Kit
#142 Pro Test Lead Kit includes our premium set of interchangeable specialty test probes designed for automotive use.
Canadian Price: $85.00
This lead set features an extended length of 64 inches. The flexible back probing pins are great for sliding into automotive connectors like those on fuel injectors and MAP sensors. In addition, the large Crocodile Clips are good for clipping to grounds and battery terminals. Includes roll up storage pouch to keep your leads organized. These are compatible with most DMM’s and scopes.
Includes:
- One set of Interconnect Leads - Extended length of 64 inches.
- Test probes
- Flexible Silicon Back Probe Pins
- Bed of Nails Style Wire Piercing Clips
- Heavy Duty Insulation Piercing Clips
- Crocodile Clips
- Deluxe Storage Pouch
EsiTest #143 Automotive Test Lead Kit
Test Lead Kit includes our basic set of interchangeable specialty test probes designed for automotive use.
Canadian Price: $39.95
The flexible back probing pins are great for sliding into automotive connectors like those on fuel injectors and MAP sensors. The large Crocodile Clips are good for clipping to grounds and battery terminals. Roll up storage pouch keeps your leads organized.
Includes:
- One set of Interconnect Leads – length 64 inches
- Test Probes
- Flexible Silicon Back Probe Pins
- Shielded Alligator Clips
- Large Crocodile Clips
- Deluxe Storage Pouch
- Roll up storage pouch
EsiTest Model #138 Mag Lead w/Alligator Clips
Canadian Price: $30.95
- 54" Test Lead Set
- Mag Lead features a magnetic disconnect.
- You can "stick" to any metallic ground or test point.
- Time saving product - can substitute for alligator clips at metallic test points.
- Now, when you need alligator clips, you've got them!
- Fits almost all DMM's and hand held scopes.
- Get the Mag Lead, it stays put and won't fall off!
#140 MAG LEAD Pro Test Lead Kit
Canadian Price: $145.00
Test Ranges:
- DC & AC Amps 0-600A (1mV/A Output) 0-1000A (.1mV/A Output)
- Need to stick to a good ground or test point? Get the MAG LEAD!
- Now get the MAG LEAD with a complete set of interchangeable specialty test probes.
- All connect via magnetic connector!
Includes the following:
- One set MAG LEADS
- Interconnect leads
- Back Probe Pins
- Crocodile Clips
- Alligator Clips
- Long Reach Grabber Jaw Clips
- Hook/Pin Style Wire Piercing Clips
- Bed of Nails Wire Piercing Clips
- Deluxe Storage Pouch
EsiTest #180 LOADpro Dynamic Test Leads
Canadian Price: $95.00
LOADpro finds these problems FAST:
- High Corrosive Resistance
- Shorts to Ground
- Open Circuits
LOADpro Test Leads load the circuit to see if current can flow.
- By loading the circuit, LOADpro makes a voltage drop test “on the fly”.
- Just press the switch – the test results can not lie.
- Use LOADpro w/your DMM and follow our test method - you will find wiring faults quicker.
- LOADpro Test Leads feature SteadyPin Probe Tips, which allows the probe to sit firmly on a male ECM or connector pin.
- LOADpro are OEM approved – finds corroded circuits fast!
The process is very simple - just read voltage. It’s that easy, really. If a vehicle component is inoperable, just unplug the connector. Read voltage at the connector. Do you see 12 volts? If yes, press the LOADpro switch – if the voltage remains, the wiring is good – go on to something else. If the voltage drops – the circuit has high resistance… i.e.- corroded wiring or connections. If you see no voltage initially, you have an open or short to ground.
LOADpro Test Leads also feature SteadyPin Probe Tips. Instead of a pointed probe, SteadyPin tips have a small recess at the tip that allows the probe to sit firmly on a male ECM or connector pin. Traditional pointed probes fail to give an effective connection and creates difficulties in completing manufacturer specific voltmeter tests.
We recommend replacing your existing test leads with LOADpro and leave them in place.
NOTE - LOADpro Dymanic Test Leads and the 200 page book "Fundamental Electrical Troubleshooting" are available in a bundle. See part #181 for this combination.
EsiTest #180 LOADpro Dynamic Test Leads Canadian Price $95.00
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
Pico CAN Test Box
The CAN Test Box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles.
Canadian Price: $285
Depending on the configuration of the vehicle, this may allow you to check power, ground and CAN Bus signal quality. With the test leads supplied you can connect your PicoScope automotive scope, or any other suitable scope, to the CAN Test Box to monitor any signals present, such as the CAN High and Low signals.
The CAN Test Box connects to a vehicle᾿s OBDII / EOBD connector and lets you easily diagnose electrical faults.
- Instantly check power and ground circuits
- Identify communication link protocols
- Connect an oscilloscope for signal capture and collection of signal waveform data
Pico CAN Test Box $285
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
Pico Coil-On-Plug Extension Lead
Coil-on-Plug extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on Coil-on-Plug ignition systems.
Canadian Price: $180.00 (4)
Overview
Coil-on-Plug extension leads are designed to aid diagnostics on secondary ignition circuits by allowing an HT measurement to be made when there is no, or limited, access to any spark plug leads. The leads are specifically designed for use with the PP178 Secondary Ignition Pickup.
COP extension leads are easy to use: simply fit them between the coil pack and the plugs, place a capacitive secondary ignition pickup on each lead, and your oscilloscope will show accurate ignition waveforms with correct kV measurements.
Coil-on-Plug extension leads are designed for use with PicoScope automotive oscilloscopes, but can also be used on all other labscopes that are capable of displaying ignition patterns.
Pico Coil-On-Plug Extension Lead Canadian Price $180.00 (4)
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com