Pico WPS500X Pressure Transducer Kit
#PP939 $1242 CAD
#PP939 $1242 CAD
Pico WPS500X Pressure Transducer Kit
$1242 CAD
Plus applicable taxes and shipping$1242 CAD
Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
FirstLook ADS ES 100 Sensor
The ADS ES 100 Sensor is intended for use with Digital Storage Oscilloscopes.
Canadian Price: $465
Using this sensor to detect and observe pulses in the exhaust pipe and in the crankcase through the oil dipstick tube allows the technician to rapidly assess the mechanical condition of the engine, without ever needing to use even a wrench. Relative cylinder compression, rings and exhaust valve condition, and even the presence of pressure loss into the crankcase may easily be evaluated in just a few minutes of testing. If problems are noted in these tests, it is very likely that the OBD codes showing on a scanner will prove to be erroneous. On the other hand if all seems well by these tests, the OBD codes will very likely prove correct.
FirstLook ADS ES 100 Sensor $465
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
FirstLook ADS ES 100-D Sensor
For diesel engines. The ADS Es 100 – D is intended for use with Digital Storage Scopes.
Canadian Price: $495
This sensor kit contains the same sensor as in the ADS ES 100 automotive kit, except that it has been modified to include a higher temperature resistant hose, a 50’ coaxial cable, larger retaining springs and a hand clamp on the probe hose to facilitate the larger diameter exhaust pipes on large diesel vehicles.
With the diesel engine, a simultaneous pulse train graph from the crankcase, taken through the dipstick hole, and a pulse train taken from the exhaust pipe will tell the tale. One set of data is taken at “cold crank”, with no fuel fed into the engine, and another is taken at warm idle, when the engine is up to operating temperature. Comparing these traces, taken without the need for any use of tools or disassembly, will clearly show the physical condition of the engine and point to any valve, head gasket, cylinder ring or cracked piston problem that may exist.
FirstLook ADS ES 100-D Sensor $495
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
The ADS ES 300 Sensor
The ADS ES 300 Sensor is intended for use with Digital Storage Scopes.
Canadian Price: $595
Using this sensor to detect and observe fuel pressure pulses in gasoline engines using returnless injector fuel rails, injector performance can be compared between cylinders to quickly detect problem injectors in a running engine.
The ADS ES 300 connects to the fuel rail through a Schrader valve, and if one is present, again no tools or disassembly of any part of the engine is required to run this test. If no Schrader valve is present most mechanics are able to install one with no problem and proceed with the testing program. This sensor may also be installed directly on several of the volumetric fuel pump testers that are in common use in automotive repair shops everywhere.
The ADS ES 300 Sensor $595
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
Exhaust Adapter Test Kit #EATK
For Pre and Post Converter Exhaust Sampling and Back-Pressure Testing
Canadian Price: $490
Complete Kit Includes
- Correct size drill and tool set to properly install threaded rivet nut in exhaust pipe ahead of converter.
- Stainless steel flex leader hose (threads into rivet nut), and 48”Furon hose extension with female quick
- Back-pressure test gauge with 48”Furon extension hose and male quick coupler.
- Spare male quick coupler fitting to adapt to exhaust pick-up hose.
- 50 rivet nuts, steel cap screws & washer.
- Sample piece of exhaust pipe with rivet nut properly installed (to aid in customer sales).
- Detailed instruction sheet covering proper use of tool set, back-pressure testing tips, catalytic converter efficiency test calculation sheet, & service selling
- Heavy duty carry case.
Also available is Part #EATK-PAK, which is an extra item #2 above, plus a 3-way valve, with quick-coupler adapters to enable post cat testing (back-pressure, and exhaust sampling) after cat, to save time and improve the accuracy of testing. This eliminates the need to go to the tail pipe for the post cat sampling and also enables isolation of excess back-pressure to converter or downstream exhaust restriction.
Exhaust Adapter Test Kit #EATK $490
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
Autovolumeter Fuel Volume Test Kit #AV-1R
For Testing Fuel System Pressures, Volume and Flow Rate
Canadian Price: $545
Complete Kit Contents:
- Carry case containing fuel volume/flow meter, pressure gauge, control valve and adapter hoses. Unit works in conjunction with most fuel injection cleaning systems, or connects to schrader valves, or accessible fuel lines for system testing (and dead-head pressure tests depending on hook-up).
- Includes bleed valve and fitting for returnless systems.
- Includes hook and chain so unit can be suspended from hood safety latch in vertical operating position.
- Operating instructions and testing tips.
Additional Benefits
Proper operating pressure does not prove adequate fuel flow or volume. This kit enables proper flow and volume testing. In conjunction with other pressure testers, or fuel injection service equipment, which you probably already have, this unit will help you verify and pinpoint fuel delivery problems before removing the tank. This kit eliminates guess work when it comes to fuel flow and volume testing. Extension hoses are available to permit road testing. All parts are individually replaceable for service and repair.
Other Related Products:
Part # AVX-2 Extension hoses (2 @ 8’) to permit road testing of AV-1R, AV-2.
Part # AV-2 Auto-Volumeter for fuel injector flow testing.
Autovolumeter Fuel Volume Test Kit #AV-1R $545
Plus applicable taxes and shipping.Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com