Ignition Testers


TA500 Smartach+COP: Multi-system Ignition Analyzer
TA500 SmarTach+COP Hand Held Tester
Simple to use, the TA500 requires no special adapters, cables or a scope and is equipped with a large digital display that shows spark plug voltage, spark burn time, RPM, as well as Min/Max readings in real time.
TA500 SmarTach+COP Canadian Price: $295

The TA500’s unique and proprietary technology allows the user to perform quick and reliable diagnostics of non-starts, misfires, fouled up or damaged spark plugs and/or spark plug wires, by comparing digital read-outs of the spark plug voltage and spark burn time between cylinders on engines using Coil on Plug, Coil near Plug, conventional distributor/ignition coil, DIS (Distributor-less) or waste spark and magneto technologies.

Multisystem ignition analyzer

  • Measures spark plug voltage from 0 to 50000 Volt
  • Measures spark burn time from 0 to 10 ms
  • Special antenna sensor allows quick testing of Coil on Plug and Coil near Plug modules, and easy hook-up to spark plug and ignition coil wires
  • No ground wire connections required, for fast troubleshooting
  • Multiple diagnostic applications are described in comprehensive User's Handbook (Included)

Tachometer function

  • For 1 to 12 cylinders and 2, 4 cycles with special DIS (Distributor-less or waste spark) mode.
  • Measures from 200 to 20000 RPM on a 4-1/2 digits LCD display
  • Advanced microcontroller technology yields 0.5 % accuracy
  • Works on Coil on plug, Coil near Plug, DIS (Distributorless or waste spark), Conventional, Magneto and other spark ignition system.

Simple and easy to use

Ignition Analyzer: Place the antenna's capacitive sensor on top of the Coil on Plug module, or over a spark plug or ignition coil wire. Spark peak voltage and spark burn time are displayed.

Tachometer: Set the number of cycles and type of ignition system, and then either place the capacitive sensor on a coil on plug module or spark plug wire, and RPM is displayed.

Selectable display functions: The display can be set to show all three (RPM, spark burn time and spark plug voltage)measurements simultaneously, or one of the selected measurements with real time maximum and minimum readings.

Spark capture mode: Maximum and minimum captures the spark peak voltage and spark burn time for testing of ignition systems for no start conditions diagnosis.



TA500 SmarTach+COP Canadian Price: $295

Plus applicable taxes and shipping.

Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com

(800) 665-8773 Toll free




Auto-Wyze Coil-On-Plug Ignition Probe

Auto-Wyze Coil-On-Plug Ignition Probe
The Wyzeprobe coil on plug ignition probe is the fastest way to test secondary ignition systems and engine integrity.
Ignition Probe Canadian Price: $235

  • Find misfires faster
  • Gives scope patterns of the secondary faster than scoping the primary
  • Works with all labscopes
  • Suitable for all ignition types COP-DIS-Coil Near Plug-Coil in cap-and Conventional
  • No batteries required
  • Easy to use
  • 14 and 24 inch lengths available
  • No special ignition adaptors needed
  • Sheilded to probe tip
  • Built in scope protection from high voltage arcs

Coil-On-Plug Ignition Probe Canadian Price: $235
Plus applicable taxes and shipping.

Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com

(800) 665-8773 Toll free