Pico WPS500X Pressure Transducer Kit
#PP939 $1242 CAD
#PP939 $1242 CAD
Pico WPS500X Pressure Transducer Kit
$1242 CAD
Plus applicable taxes and shipping$1242 CAD
Contact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
FirstLook ADS ES 100 Sensor
The ADS ES 100 Sensor is intended for use with Digital Storage Oscilloscopes. Using this sensor to detect and observe pulses in the exhaust pipe and in the crankcase through the oil dipstick tube allows the technician to rapidly assess the mechanical condition of the engine, without ever needing to use even a wrench.
Canadian Price: $465
Relative cylinder compression, rings and exhaust valve condition, and even the presence of pressure loss into the crankcase may easily be evaluated in just a few minutes of testing. If problems are noted in these tests, it is very likely that the OBD codes showing on a scanner will prove to be erroneous. On the other hand if all seems well by these tests, the OBD codes will very likely prove correct.
FirstLook ADS ES 100 Sensor Canadian Price $465
Plus applicable taxes and shippingContact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
FirstLook ADS ES 100-D Sensor
This sensor kit contains the same sensor as in the ADS ES 100 automotive kit, except that it has been modified to include a higher temperature resistant hose, a 50’ coaxial cable, larger retaining springs and a hand clamp on the probe hose to facilitate the larger diameter exhaust pipes on large diesel vehicles.
Canadian Price: $495
With the diesel engine, a simultaneous pulse train graph from the crankcase, taken through the dipstick hole, and a pulse train taken from the exhaust pipe will tell the tale. One set of data is taken at “cold crank”, with no fuel fed into the engine, and another is taken at warm idle, when the engine is up to operating temperature. Comparing these traces, taken without the need for any use of tools or disassembly, will clearly show the physical condition of the engine and point to any valve, head gasket, cylinder ring or cracked piston problem that may exist.
FirstLook ADS ES 100-D Sensor Canadian Price $495
Plus applicable taxes and shippingContact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
FirstLook ADS ES 300 Sensor
Using this sensor to detect and observe fuel pressure pulses in gasoline engines using returnless injector fuel rails, injector performance can be compared between cylinders to quickly detect problem injectors in a running engine.
Canadian Price: $595
The ADS ES 300 Sensor is intended for use with Digital Storage Scopes.
The ADS ES 300 connects to the fuel rail through a Schrader valve, and if one is present, again no tools or disassembly of any part of the engine is required to run this test. If no Schrader valve is present most mechanics are able to install one with no problem and proceed with the testing program. This sensor may also be installed directly on several of the volumetric fuel pump testers that are in common use in automotive repair shops everywhere.
ADS ES 300 Sensor Canadian Price $595
Plus applicable taxes and shippingContact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com
(800) 665-8773 Toll free
Fluke PV350 Pressure Vacuum Module
Use to measure fuel, oil or transmission pressure or engine vacuum.
Canadian Price: $425
The Fluke PV350 turns your lab scope or digital multimeter into a complete measuring system for measuring:
- hydraulic and pneumatic pressures up to 500 psig.
- vacuum to 29.9 Hg
- Flip a switch on the module to change from pressure to vacuum and vice-versa.
Connection to Test Instruments
The Fluke PV350 can connected to multimeters, automotive lab scopes and industrial lab scopes.
Lab Scope with BNC input (Fluke, Tektronix, Analogs, Interro, Genisys, Pico): Use a banana-to-bnc adapter such as the AES# 08-88-M.
Lab Scope with Banana input: (LS-2000, ADL-7100, ET-2020, Pereption, Vet 5100, MODIS) The module plugs into standard diameter banana jacks however since these scope may have the ground input spaced further apart from the channel input you may need to use your test leads to make the connection.
Meter: The module plugs into standard diameter banana jacks in the front of any multimeter.
Fluke PV350 Pressure Vacuum Module Canadian Price $425
Plus applicable taxes and shippingContact Ron Brown at Auto-Know Inc.
248 Slater Crescent, Oakville, ON, L6K 2C8
ronbrown@on.aibn.com